Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Matsumoto, Toshinori; Kawabe, Ryuhei*; Iwasawa, Yuzuru; Sugiyama, Tomoyuki; Maruyama, Yu
Annals of Nuclear Energy, 178, p.109348_1 - 109348_13, 2022/12
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)The Japan Atomic Energy Agency extended the applicability of their fuel-coolant interaction analysis code JASMINE to simulate the relevant phenomena of molten core in a severe accident. In order to evaluate the total coolability, it is necessary to know the mass fraction of particle, agglomerated and cake debris and the final geometry at the cavity bottom. An agglomeration model that considers the fusion of hot particles on the cavity floor was implemented in the JASMINE code. Another improvement is introduction of the melt spreading model based on the shallow water equation with consideration of crust formation at the melt surface. For optimization of adjusting parameters, we referred data from the agglomeration experiment DEFOR-A and the under-water spreading experiment PULiMS conducted by KTH in Sweden. The JASMINE analyses reproduced the most of the experimental results well with the common parameter set, suggesting that the primary phenomena are appropriately modelled.
Iwasawa, Yuzuru; Sugiyama, Tomoyuki; Abe, Yutaka*
Nuclear Engineering and Design, 386, p.111575_1 - 111575_17, 2022/01
Times Cited Count：3 Percentile：53.91(Nuclear Science & Technology)Miyahara, Shinya*; Kawaguchi, Munemichi; Seino, Hiroshi; Atsumi, Takuto*; Uno, Masayoshi*
Proceedings of 28th International Conference on Nuclear Engineering (ICONE 28) (Internet), 6 Pages, 2021/08
In a postulated accident of fuel pin failure of sodium cooled fast reactor, a fission product cesium will be released from the failed pin as an aerosol such as cesium iodide and/or cesium oxide together with a fission product noble gas such as xenon and krypton. As the result, the xenon and krypton released with cesium aerosol into the sodium coolant as bubbles have an influence on the removal of cesium aerosol by the sodium pool in a period of bubble rising to the pool surface. In this study, cesium aerosol removal behavior due to inertial deposition, sedimentation and diffusion from a noble gas bubble rising through liquid sodium pool was analyzed by a computer program which deals with the expansion and the deformation of the bubble together with the aerosol absorption considering the effects of particle size distribution and agglomeration in aerosols. In the analysis, initial bubble diameter, sodium pool depth and temperature, aerosol particle diameter and density, initial aerosol concentration in the bubble were changed as parameter, and the results for the sensitivities of these parameters on decontamination factor (DF) of cesium aerosol were compared with the results of the previous study in which the effects of particle size distribution and agglomeration in aerosols were not considered. From the results, it was concluded that the sensitivities of initial bubble diameter, the aerosol particle diameter and density to the DF became significant due to the inertial deposition of agglomerated aerosols. To validate these analysis results, the simulation experiments have been conducted using a simulant particles of cesium aerosol under the condition of room temperature in water pool and air bubble systems. The experimental results were compared with the analysis results calculated under the same condition.
